PEMBUATAN NANOFIBER SERAT RAMI (BOHMERIA NIVEA) DENGAN METODE SEMIMEKANIS

Gery Prizlanto, Heru Santoso Budi Rochardjo

Abstract


Selulosa adalah biopolimer alami yang ketersediaannya melimpah, dapat diperbaharui, dan biodegradable. Serat selulosa alami paling banyak terdapat pada tumbuh-tumbuhan (Lima & Borsali, 2005). Serat rami telah menarik banyak perhatian karena biodegradabilitas dan sifatnya yang ramah lingkungan. Micro/nanofiber yang diperoleh dari serat alam memiliki properti mekanis yang jauh lebih tinggi, dimana hal ini menjadi hal yang sangat menarik perhatian para peneliti Proses pengubahan serat rami dari ukuran makro menjadi nanofiber dapat dilakukan dengan berbagai cara, salah satu diantaranya adalah dengan metode semimekanis. Dalam metode ini, serat rami mendapat perlakuan secara kimia dengan larutan NaOH 5% terlebih dahulu sebelum diproses secara mekanis. Hasil penelitian menunjukkan bahwa dari metode semimekanis diatas menyebabkan terjadinya perubahan ukuran serat rami dari serat berdiameter > 10 ɥm menjadi serat yang berukuran antara kurang lebih 100 – 500 nm. Karakterisasi serat makro dan nano dilakukan dengan alat Scanning Electron Mycroscopy (SEM).

Keywords


nanofiber, rami, semimekanis, SEM

Full Text:

PDF

References


Alemdar, A., & Sain, M. (2008). Isolation and characterization of nanofibers from

agricultural residues – Wheat straw and soy hulls. Bioresource Technology,

,1664–2167.

Corrêa, A. C., Teixeira, E. M., Pessan, L. A., & Mattoso, L. H. C. (2010). Cellulose

nanofibers from curaua fibers. Cellulose, 17, 1183–1192.

Dewi T. K, Dandy, Akbar W.2010. Pengaruh Konsentrasi NaOH, Temperatur

Pemasakan, dan Lama Pemasakan pada Pembuatan Pulp dari Batang Rami dengan

Proses Soda. Jurusan Teknik Kimia. Universitas Sriwijaya. Indonesia.

Eichhorn, S. J., Dufresne, A., Aranguren, M., Marcovich, N. E., Capadona, J. R.,

Rowan, S.J., et al. (2010). Review: Current international research into cellulose

nanofibres and nanocomposites. Materials Science, 45, 1–33.

George, J., Sreekala, M.S. and Thomas, S., 2001. A review on interface modification

and characterization of natural fiber reinforced plastic composites. Polymer

Engineering and Science, 41(9): 1471-1485.

Kamel, S. (2007). Nanotechnology and its applications in lignocellulosic composites,a

mini review. Express Polymer Letters, 1, 546–575.

Lima, M. M. S., & Borsali, R. (2004). Rodlike cellulose microcrystals: Structure,

properties, and applications. Macromolecular Rapid Communications, 25, 771–787.

Marsyahyo, E., Soekrisno, R., Rochardjo, H.S.B., Jamasri, 2009, Primary Investigation

on Bulletproof Panels Made from Ramie Fiber Reinforced Composites for NIJ Level

II, IIA, and IV, Journal of Industrial Tech. Vol.39, No.1. pp. 13-26.

Siqueira, G., Bras, J., & Dufresne, A. (2009). Cellulose whiskers versus microfibrils:

Influence of the nature of the nanoparticle and its surface functionalization on the

thermal and mechanical properties of nanocomposites. Biomacromolecules, 10,

–432.

Prosiding Seminar Nasional Penelitian dan PKM Sains, Teknologi dan Kesehatan

Teixeira, E. M., Corrêa, A. C., Manzoli, A., Leite, F. L., Oliveira, C. R., & Mattoso, L.

H.C. (2010). Cellulose nanofibers from white and naturally colored cotton fibers.

Cellulose, 17, 595–606.

Yano H., Uetani K. 2011. Nanofibrillation of Wood Pulp Using High Speed Blender.

Kyoto University. Japan.




License URL: https://creativecommons.org/licenses/by-nc/4.0